Skip to main content

Safety assessment of the substance phosphorous acid, triphenyl ester, polymer with alpha‐hydro‐omega‐hydroxypoly[oxy(methyl‐1,2‐ethanediyl)], C10–16 alkyl esters (FCM No 1076), for use in food contact materials

EFSA Journal logo
Wiley Online Library

Meta data

Competing interests: R. Franz declared that Fraunhofer institute at which he was employed provides advisory services to private business operators active in the sector on food contact materials. In line with EFSA's Policy on Independence (http://www.efsa.europa.eu/sites/default/files/corporate_publications/fi…) and the Decision of the Executive Director on Competing Interest Management (https://www.efsa.europa.eu/sites/default/files/corporate_publications/f…), a waiver was granted to R. Franz regarding his participation to the EFSA's Working Group on Food Contact Materials (FCM WG) in accordance with Article 21 of the Decision of the Executive Director on Competing Interest Management. Pursuant to Article 21(6) of the above‐mentioned Decision, the involvement of R. Franz is authorised as member in the FCM WG, allowing him to take part in the discussions and in the drafting phase of the scientific output, but he is not allowed to be, or act as, a chairman, a vice‐chairman or rapporteur of the working group.

Abstract

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP Panel) assessed the safety of the substance ‘phosphorous acid, triphenyl ester, polymer with alpha‐hydro‐omega‐hydroxypoly[oxy(methyl‐1,2‐ethanediyl)], C10–16 alkyl esters’ obtained by reaction of ■■■■■ This food contact material (FCM) substance No 1076 was evaluated by the CEP Panel in 2019 for its use in high impact polystyrene. This opinion deals with the safety assessment of the substance when used as an additive at up to 0.025% w/w in acrylonitrile‐butadiene‐styrene (ABS) copolymers. The plastic is intended for repeated use in contact with aqueous, acidic, alcoholic and oil‐in‐water emulsion foods, for long‐term storage at room temperature and below. Migration from ABS formulated with the substance at 0.02% w/w was up to 0.002 mg/kg in 10% ethanol, 0.005 mg/kg in 3% acetic acid and 0.027 mg/kg in 50% ethanol. Migration levels into 50% ethanol declined under repeated‐use test conditions and this decline was considered to also cover repeated contacts with 10% ethanol and 3% acetic acid simulants. The toxicological data are the same as those submitted by the same applicant in a previous dossier (EFSA‐Q‐2018‐00411). They were reported in the scientific opinion of the CEP Panel in 2019 and the conclusions on toxicity are still valid. Overall, the CEP Panel concluded that the substance phosphorous acid, triphenyl esters, polymer with alpha‐hydro‐omega‐hydroxypoly[oxy(methyl‐1,2‐ethanediyl)], C10–16 alkyl esters, does not raise a safety concern for the consumer if it is used as an additive at up to 0.025% w/w in ABS materials and articles for single and repeated use in contact with aqueous, acidic, alcoholic and oil‐in‐water emulsion foods, for long‐term storage at room temperature and below, and if its migration does not exceed 0.05 mg/kg food.